suitable for the production of wood products: (outdoor) stack bar the door frame, fence, chairs, gallery frames, garbage cans, piers,Bridges, wood houses,
suitable power: 380V/3P/50Hz the
suitable raw material: PVC \ PE powder (or broken material diameter ≤ ¢) + wood flour (wood stalk, corn stalk, cotton stalk, ground into a powder available)
100 mesh wood flour (moisture content ≤ 5%)
the production of wood-plastic products, maximum width: ≤ 200 mm
the production of wood products production: 50-200 kg / h (depending on the ratio of different products section shape)
ratio of raw materials: wood flour ≤ 50% (by weight ratio)
Operation direction: from right to left
extruder center height: 1000 mm
The total installed capacity: 180kw (actual power consumption of 100 kw, all of your computer)
cooling circulating water: ≤ 20 ° C, ≥ 0.3Mpa ≈ 20T / h
compressed air: 0.4m ³ / min ≥ 0.5Mpa
2、 PE,wood-plastic products, two - step out of the production process:
On the extrusion mold
Vacuum stereotypes traction cut off the stacked frame