suitable for the production of products: stack bar the door frame
suitable power: 380V/3P/50Hz the
suitable raw material: PVC recycling powder, PVC powder, calcium carbonate, a small material
the production of products of maximum width: ≤ 150 mm
the production of wood products production: 50-150 kg / h (depending on the ratio of different products section shape)
ratio of raw materials: calcium powder ≤ 50% (by weight ratio)
Operation direction: from right to left
extruder center height: 1000 mm
The total installed capacity: 86.3kw (actual power consumption of 100 kw, all of your computer)
cooling circulating water: ≤ 20 ° C, ≥ 0.3Mpa ≈ 20T / h
compressed air: 0.4m ³ / min ≥ 0.5Mpa
2、 PVC Product, two - step out of the production process:
Mixed material extrusion mold
Vacuum stereotypes traction cut off stacked