Common types of wooden decorative materials

Now the market can often see the wood decorative material is various wood-based panels, artificial decorative panels, moldings and assembling wooden floors

l) is the use of wood-based panels wood-based panels of wood, wood fiber, wood particles or other plant fiber as raw material, adding additives, adhesives and other sheet steel. The main varieties of wood-based panels are veneer, plywood, block board, fiberboard and particleboard.

Plywood: Plywood is glued together by the three or more monopoles. Broadleaf village consists of a plywood plywood glue two kinds of conifers village.

Fibreboard: Fibreboard is a wood, bamboo, or other crop stalks and other plant fibers from the processing of wood-based panels. Fiberboard divided according to the performance of different hardboard, hardboard and semi-soft fiberboard three. Particleboard: Particleboard, also known as particle board, wood particles are used as the main raw material, applying glue materials, additives collectively made by pressing a thin sheet. By pressing method can be squeezed into particleboard particleboard, platen Particleboard II.

Blockboard: core planks stitched together, the nature of the two surfaces to glue veneer of solid sheet, commonly known as Daixinban. Broken wood: wood processing with odd bits, the chopped, dried, mixed with glue, hot pressing.

Excelsior board: also known as the Manley panel (cement particle board), is the use of wood scraps, machines dig into wood wool, soaked through chemical solutions, then mixing cement, into the molding pressure, hot steam, freezing, drying from.

(2) artificial veneer artificial decorative panels include decorative thin wood veneer and lacquer architectural decorative panels. Decorative thin wood veneer: a new advanced decorative material, it is the use of rare species, such as smoke, ash, willow, etc. according to the present through precision sliced ​​into thin chips 0.2-0.5mm thickness to plywood substrate, the use of advanced technology making adhesives and adhesive made.

Lacquer decoration plate: It is one of our unique decorative plates, which is based on our unique lacquer technology, Chinese lacquer paint made in a variety of wood on grass.

Printing wood panels: wood-based panels, also known as surface decoration. It is a new type of decorative panels. It is the wood-based panel board surface with a concave pattern rubber roller transfer chromatic printing machine, printing a variety of patterns (such as wood) is made of. Category: printing wood veneer, printed wood fiberboard, particleboard and other wood printing.

(3) Assembling wood floor assembly of the floor was made of ash, oak, walnut, teak and other fine wood, after drying, processing small wood strips, which can be formed after the assembly nice pattern. (4) Mouldings Mouldings is the choice of hard, fine wood, wear, corrosion resistance, no split, cut smooth, good processing properties, the paint of the color is good, good adhesion, strong wood nailed , after drying, processing by machining or hand made. Mouldings include: ceiling line: on the ceiling junction edge surfaces at different levels, the abutment surface of the sealing of the different materials on the ceiling, the ceiling molding line on the plane, on the ceiling edge devices.

Ceiling moldings: ceilings and walls, ceilings and cylinder seal junction.